HOME > PRODUCTS

OUR PRODUCT

Miyawaki GL11-A Pumping Trap

Model

Application

Steam / Water

Max Min Temperature (°C)

0 - 220°C

Material

Ductile Iron

Connection

Threaded / Flanged

Size

1"

Pressure

16 Bar

Medium

Max Capacity kg/h

Body and Cover Material

Secondary Pressure Range

Type of Trap

Glass O.D / Length

Pipe Size

PRODUCT ENQUIRY

vtechmatic-667

Miyawaki GL11-A Pumping Trap

    Description

    Energy saving

    • Miyawaki GL11-A Pumping Traps are able to pressure feed low-pressure condensate to high-pressure condensate recovery lines in higher or remote locations. The incorporation of this product enables the previously unused heat energy of condensate to be recovered and efficiently utilized, thus bringing significant benefits in terms of energy saving.

    Low filling head

    • Miyawaki GL11 pumping trap have a very low filing head, providing good capacity without the need of higher collectors.

    Electricity not required

    • Pushes condensate out using the pressure of the motive medium*, therefore can easily be installed in ex-proof areas.
      No need for additional power grid for remote installations.
      *As well as steam, the motive medium can be compressed air, nitrogen gas, or other such gases.

    Typical Applications

    ● Recovery of low-pressure condensate (in combination with collectors)
    ● Support the discharge of condensate from heat exchangers operating close to or below 0 barg

    ● Stall elimination
    *Stall is a phenomenon where the steam trap does not work due to a drop in pressure on the device’s primary side and condensate builds up inside the device. Not only does this prevents the discharge of condensate, it also leads to an increased possibility of water hammer or heat exchanger corrosion occurring.

    RELATED PRODUCTS