Thermostatic Steam Trap

Thermostatic steam trap operates on the temperature difference between steam and condensate. The operation of the steam trap is regulated by a thermostatic element inside the trap.

The discharge temperature can be adjusted manually, which allows to adopt these steam traps to a wide range of applications, where optional undercooling is possible and where sensible heat savings and flash steam reduction are desirable.

Applications

  • Steam Main Lines, Steam Tracer for low and medium pressure: TB7N, TB9N
  • Steam tracer for low pressure: TBC2, TB1N
  • High pressure steam main lines: TB51, TB52, TBH71, TBH72, TBH81. TBH82
  •  

Thermostatic steam trap is perfectly fitted for reducing the steam consumption at steam main and steam tracing lines thus guaranteeing a high degree of energy savings.

TB Series – Bimetallic Steam Traps

D Series – Balanced Pressure Steam Traps

TB Series – Bimetallic Thermostatic Steam Trap

 
Model
Available
Sizes
Available
Connections
Maximum
Operating
Pressure
MPa (psig)
Maximum
Operating
Temperature
°C (°F)
Body and
Cover Material
Download
1/4″, 3/8″
Screwed
Rc & NPT
1,6
(230)
350
(662)
Carbon Steel
TB9N
1/2″ – 1″
Screwed
Rc & NPT
Socket weld
JIS, ASME, DIN
Flanged
JIS, ASME, DIN
1,6
(230)
350
(662)
Forged Steel
TB7N
1/2″ – 1″
2,1
(305)
TBC2
1/4″, 3/8″
Screwed
Rc, NPT
1,0
(145)
220
(428)
Stainless Steel
1/2″– 1″
Screwed
Rc & NPT
Socket weld
JIS, ASME, DIN
Flanged
JIS, ASME, DIN
 
6,5
(943)
425
(800)
Forged Steel
TB52
1/2″ – 1″
475
(887)
Forged Steel
TBH71
1/2″– 1″
Socket weld
JIS, ASME, DIN
Flanged
JIS, ASME, DIN
10,5
(1522)
470
(878)
Cast Steel
TBH72
1/2″– 1″
550
(1022)
Cast Steel
TBH81
1/2″– 1″
20,0
(2900)
470
(878)
Cast Steel
TBH82
1/2″ – 1″
550
(1022)
Cast Steel

D Series - Balanced Pressure Thermostatic Steam Trap

Model Available Sizes Available Connections Maximum Operating Pressure MPa (psig) Maximum Operating Temperature °C (°F) Body and Cover Material Download
DL1 1/2″-1″ Screwed Rc & NPT 2,1 (305) 220 (428) Stainless Steel
DF1 1/2″ – 1″ Screwed Rc & NPT Socket weld JIS, ASME, DIN Flanged JIS, ASME, DIN 2,1 (305) 235 (455) Forged Steel
DV1 with bypass 1/2″ – 3/4″ Screwed Rc & NPT 1,0 (145) 184 (363) Stainless Steel
DC1 1/2″ – 1″ Screwed Rc, NPT Flanged JIS, ASME, DIN 2,1 (305) 220 (428) Stainless Steel
DC2R 1/2″ male x 1/2″ female Screwed Rc, NPT 1,6 (230) 220 (428) Stainless Steel
DX1 38 mm Tri-Clamp 0,5 (73) 160 (320) Stainless Steel