A calorifier supplies hot water to kitchens, washrooms, process lines and cleaning systems, often without anyone noticing it is there. That is exactly why calorifier maintenance is easy to delay. Yet a neglected calorifier can waste energy, deliver water at the wrong temperature, corrode from the inside and, if temperatures fall into the wrong range, allow Legionella bacteria to grow.
This guide explains what a calorifier does, the most common problems, the routine checks that keep it safe and efficient, and how it relates to a hot water generator and a hot water boiler.
What Is a Calorifier?
A calorifier is a heat exchanger that heats water indirectly. A primary heat source, usually steam or high-temperature hot water, flows through a coil or tube bundle inside a storage vessel. Heat passes through the tube walls into the surrounding water, which is then drawn off for use.
Because the heating medium never mixes with the stored water, a calorifier can use steam from an existing boiler plant to produce clean hot water. This makes it a common choice in hotels, hospitals, food factories and industrial sites that already run a steam system. The stored volume also acts as a buffer, so the site can meet short peaks in demand without oversizing the heat source.
Calorifier, Hot Water Generator and Hot Water Boiler: What Is the Difference?
The three terms are often used interchangeably, but they describe different equipment:
| Equipment | How it heats water | Typical use |
| Calorifier | Indirectly, using steam or primary hot water through a coil or tube bundle, with storage | Sites with an existing steam or primary heating system |
| Hot water generator | Often instantaneous or semi-storage, heating water on demand with steam or another medium | Sites needing fast recovery and less storage volume |
| Hot water boiler | Directly, by burning fuel or using electric elements to heat the water | Standalone hot water supply without a steam plant |
The right choice depends on demand, available heat sources and space. Techmatic’s calorifier and hot water generator range covers equipment for different demand profiles, and each type needs its own maintenance approach.
Common Calorifier Problems
Scaling
Singapore’s water supply can still leave mineral deposits on heating surfaces over time. Scale on the coil acts as insulation, so the calorifier takes longer to heat water and uses more steam to do it. Heavy scale can also trap sediment at the bottom of the vessel.
Corrosion
Internal corrosion affects the shell, tube bundle and fittings, especially where water treatment is poor or sacrificial anodes have been used up. External corrosion under damaged insulation is also common and often goes unseen.
Temperature control faults
A sticking or poorly set temperature control valve can cause water to overheat, creating a scalding risk, or underheat, creating a bacterial risk. A failed steam trap on the coil outlet can flood the coil with condensate, reducing heat transfer and causing unstable temperatures.
Legionella risk
Legionella bacteria multiply in water between roughly 20°C and 45°C, particularly where water is stagnant and sediment is present. The UK Health and Safety Executive’s technical guidance HSG274, widely used as a reference for hot and cold water systems, recommends storing hot water at 60°C or above and distributing it so that it reaches at least 50°C at outlets within one minute. A calorifier that runs cooler than this, or has a cold layer at the base, can become a breeding ground.
Routine Calorifier Maintenance Checklist
A structured maintenance plan helps keep water safe, energy use down and equipment in good condition.
Monthly
- Record flow and return temperatures to confirm the stored water stays at or above 60°C and returns at 50°C or more.
- Check the temperature control valve responds correctly and holds the set point.
- Inspect steam traps and condensate drainage on the coil outlet.
- Look for leaks at flanges, gaskets and valves.
Quarterly
- Drain water from the base of the vessel to remove sediment.
- Check pressure and temperature relief valves for signs of passing or weeping.
- Inspect insulation and cladding for damage or moisture.
Annually
- Carry out an internal inspection, following HSG274’s guidance, by removing the inspection hatch and checking for scale, sludge and corrosion.
- Clean or descale the coil and vessel where needed.
- Test all safety devices, including relief valves and high-temperature cut-outs.
- Review water treatment and anode condition.
HSG274 lists monthly calorifier temperature checks and annual internal inspection among its routine tasks, which is a useful benchmark for Singapore facilities.
Temperature Control and Safety Devices
Good temperature control protects both people and equipment. The temperature control valve on the steam supply should be sized correctly for the load and serviced so it does not stick. Many sites add a high-limit cut-out as a second layer of protection against overheating.
Relief valves protect the vessel from overpressure. They should be checked regularly for passing, tested at planned intervals and replaced when worn. For more on how often these valves need attention, see our guide to pressure safety valve testing and recertification Pressure Safety Valve Testing and Recertification: How Often Should It Be Done?.
Does a Calorifier Need to Be Registered With MOM?
This depends on design. A calorifier heated by steam may fall under the Ministry of Manpower’s definition of a steam receiver. According to MOM’s guidance on steam receiver registration, equipment does not need to be registered where the safe working pressure does not exceed 0.5 bar, or where the product of safe working pressure and volume does not exceed 100 bar-litres. Equipment above these limits must be registered and examined, so check with your Authorised Examiner if you are unsure.
Cleaning, Descaling and Professional Servicing
Some calorifier maintenance can be done by site teams, but internal cleaning, descaling and tube bundle work are best handled by specialists. Professional heat exchanger cleaning and maintenance restores heat transfer and records the fouling rate, so the next clean can be planned before performance drops.
Where a calorifier shares its steam supply with the main boiler, it makes sense to service both together. Combining calorifier checks with hot water boiler and steam boiler servicing reduces shutdowns and keeps records in one place.
Frequently Asked Questions
How often should a calorifier be serviced?
Temperatures should be checked monthly, with sediment draining every few months and a full internal inspection and service at least once a year.
What temperature should a calorifier store water at?
HSG274 recommends storing hot water at 60°C or above to control Legionella, while managing scalding risk at outlets.
Why is my calorifier taking longer to heat water?
The most common causes are scale on the coil, a waterlogged coil from a failed steam trap, or a faulty temperature control valve.
Is a hot water generator the same as a calorifier?
Not exactly. A calorifier usually includes storage, while a hot water generator often heats water on demand with less storage.
Can a calorifier be descaled without replacing the coil?
In most cases, yes. Chemical or mechanical descaling can restore performance unless the coil is badly corroded or damaged. An inspection first confirms whether cleaning or replacement is the better option.
Conclusion: Keep Hot Water Safe and Efficient
Regular calorifier maintenance protects water quality, prevents energy waste and extends equipment life. Monthly temperature checks, planned cleaning and well-maintained controls make the biggest difference.
For calorifier, hot water generator or hot water boiler support, contact Techmatic Controls to speak with our team.
REFERENCES:
- Health and Safety Executive. (2024). Legionnaires’ disease: Technical guidance (HSG274), Part 2: The control of legionella bacteria in hot and cold water systems. HSE. https://www.hse.gov.uk/pubns/books/hsg274.htm
- Ministry of Manpower. (2025). What types of steam receivers need to be registered with MOM? Ask.gov.sg. https://ask.gov.sg/mom/questions/cm9kjrbnh00mpdfrqf9g4mgfg
